iLC212 uncooled IR imaging module, also known as the uncooled thermal module, is radiometric-capable and has available infrared non-contact temperature measurement function. It includes an exceptionally small size 256x192 / 12μm wafer level package (WLP) infrared detector that captures long-wave infrared (LWIR) spectrum that ranges from 8 to 14μm.
Compared with the same type thermal modules that have low resolution in the market, iLC212 has better image peformance due to its intelligent image processing algorithm, such as Non-uniformity Correction (NUC), 3D Noise Reduction (3DNR), 2D Noise Reduction (DNS), Dynamic Range Compression (DRC), Edge Enhancement (EE).
What's more, the iLC212 thermal imaging module has temperature measurment with a range of -20ºC~+150ºC and support expansion and customization of temperature measurement range.
Due to its fully optimized SWaP-C, the iLC212 thermal camera module has low resolution, small size, low power consumption and very low price. Thus, in the field of security and monitoring, it is very suitable for the wide angle and close range temperature measurement and monitoring.
This cost effective iLC212 thermal module can be widely used in the Security Monitoring, Thermography, Wearable Devices, Vehicles, AIoT etc.
Main Features:
- Fully Optimized SWaP-C Applications
- Various Intelligent Imaging algorithms
- Suitable for Various Infrared Products
- Support Temperature Measurement
- Low Power Consumption
| Model |
iLC212R |
iLC212R-P |
| IR Detector Performance |
| Sensitive Material |
Vanadium Oxide |
| Resolution |
256×192 |
| Pixel Size |
12μm |
| Spectral Response |
8μm~14μm |
| Typical NETD |
≤45mK |
| Image Processing |
| Frame Rate |
25Hz/30Hz |
| Start-up Time |
3s |
| Digital Video |
RAW/YUV/BT656 |
| Image Algorithm |
Non-uniformity Correction (NUC)
3D Noise Reduction (3DNR)
De-noise (DNS)
Dynamic Range Compression (DRC)
Edge Enhancement (EE) |
| Image Display |
Black Hot/White Hot/Pseudo Color |
| PC Software |
| ICC Software |
Module Control and Video Display |
| Electrical Specifications |
| Standard External Interface |
30Pin_HRS: DF40C-30DP-0.4V(51), (HRS, Male) |
| USB Expansion Board |
Type-C |
| Communication Interface |
TTL-RS232/USB2.0 |
| Digital Video Interface |
CMOS8/USB2.0 |
| Supply Voltage |
3.3V±0.1V VDC |
| Typical Power Consumption |
0.7W |
| Temperature Measurement |
| Operating Temperature Range |
-10ºC~+50ºC |
| Temperature Measurement Range |
-20ºC~+150ºC; Support Customization and Expansion |
| Temperature Measurement Accuracy |
Greater of ±3ºC/±3% (@23ºC±3ºC)
Temperature Measurement Distance is 1.5m |
Greater of ±8ºC/±8% (@23ºC±3ºC)
Temperature Measurement Distance is 1.5m |
| Regional Temperature Measurement |
Support Maximum, Minimum and Average Value of the Output Regional Temperature |
| SDK |
Windows / Linux/ARM; Achieve Video Stream Analysis and Conversion from Gray to Temperature |
| Physical Characteristics |
| Dimension (mm) |
21×21×12.8 (With 3.2mm Lens) |
21×21×17.4 (With 3.2mm Lens) |
| Weight |
8.6g±1g (With 3.2mm Lens) |
13g±1g (With 3.2mm Lens) |
| Installation Interface |
M1.6x3.3; Two Interfaces / Surface; 2 Surfaces in Total |
| Environmental Adaptability |
| Operating Temperature |
-40ºC~+70ºC |
| Storage Temperature |
-45ºC~+85ºC |
| Humidity |
5%~95%, non-condensing |
| Vibration |
5.35grms, 3 Axis |
| Shock |
Half Sine Wave, 40g/11ms, 3 Axis, 6 Direction |
| Certification |
ROHS2.0/REACH |
| Optics |
| Optional Lens |
3.2mm/F1.1; HFOV: 55.6±2.8°; Coating: AR; Fixed Athermal |
| Protection Level |
/ |
IP67 Rating |
Customer Reviews:
Customers' praises are the affirmation of our profession and service.
Wuhan Global Sensor Technology Co., Ltd is looking forward to be your reliable partner!
Global Sensor Technology is the world leading infrared detector manufacturer and service provider. It is willing to provide customers all over the world with high performance uncooled and cooled thermal imaging detectors and share its professional application experience.
Global Sensor Technology is located at Optics Valley, China. The company covers an area of 30 thousand square meters with 20 thousand square meters clean room settled for its three 8 inch fabrication lines. Thanks to the innovative and experienced staff, advanced fabrication facilities, and cutting-edge technique level, all key fabrication processes such as element purification, epitaxy growth, chip tape-out and fabrication, vacuum packaging can be done in house. The company successfully launched state-of-the-art VOx uncooled detectors, MCT and T2SL cooled detectors with full intellectual property. The product portfolio covers many different array formats, various pixel size and multiple spectral band combination, all products with high thermal sensitivity and reliability.
GST IR detectors have been widely used in thermography, security & surveillance, personal vision, automotive and consumer infrared products. The volume production capability of GST enables it to meet the growing demand from all existing and emerging markets.
1.What is infrared thermal imaging?
Infrared thermal imaging is a method of using infrared radiation and thermal energy to gather information about objects, in order to formulate images of them, or get temperature information of the objects, even in low visibility environments.
2.What is thermography?
Thermography is a non-invasive diagnostic method, based on object surface temperature detection. The infrared (IR) radiation emitted from an object is recorded and visualised in the form of a temperature distribution map. The infrared thermal image can be used to determine; structural defects, electrical faults, mechanical faults, physiological changes in people & animals, and much more.
3.What is the advantage of infrared thermal imaging?
---See through total darkness;
---Identification under camouflage;
---Long range detection;
---Heat distribution detection;
---Non-contact temperature measurement;
---Occupation awareness
4.What is infrared detector/thermal imaging sensor?
Infrared waves cannot be seen with the human eye. Infrared detector/thermal imaging sensor is an optical-electrical device to react to infrared radiation and thermal energy and convert it into electrical signal and then output visible thermal images.
5.What is the difference between uncooled and cooled IR detectors?
There are currently two types of infrared thermal imaging sensors on the market, cooled and uncooled.
Uncooled IR detectors operate at ambient temperature. It is based on semi-conductor industry and thus usually can be fabricated in big volume with small size and low cost. Uncooled IR detectors are widely used in portable/handheld/mobile devices.
Cooled IR detectors are packaged in a unit that keeps them at an extremely low temperature which shall be supported by a cyrocooler. They are much bigger, more expensive and less reliable than uncooled sensors, mainly due to the complex cooling systems they require. However, the cooled systems are incredibly sensitive and usually work with long focal length optics to achive long range mission.
knowing the conditions in which the IR detectors will be used is crucial to making the right choice.
6.What is thermal imaging module?
A thermal imaging module usually consists of an infrared detector, infrared lens and hardware electronics with software and algorithm embeded. It is the minimum unit of a thermal imaging device.
7.What is NETD?
NETD referrs to "Noise Equivalent Temperature Difference". It is a measure for how well a thermal imaging detector is able to distinguish between very small differences in thermal radiation in the image. NETD is typically being expressed in milli-Kelvin (mK). Usually the lower the NETD figure is , the higher the thermal sensitivity indicates.
8.What is SWaP3?
SWaP3 refers to size, weight, power, performance and price. It indicates the technology trend of infrared industry.
9.What is DRI?
DRI usually refers detection, recognition and indentification distance of a thermal imaging system. It is a crutial parameter to judge the performance of the thermal imaging system.
10.What is WLP? What's the advantage of WLP?
WLP refers to wafer level package. Together with metal package, ceramic package, they are the 3 main package formats of uncooled infrared detectors. Wafer level packaging (WLP) is the process of completing high vacuum packaging directly on the entire MEMS wafer, then scribing and cutting to make a single infrared detector. WLP IR detectors are just designed to meet the miniaturization and low cost requirement in the application of infrared technology to consumer electronics market. Global Sensor Technology, with volume fabrication capability, is now offering a variety of WLP infrared module solutions to boost more new applications of emerging markets.
11.What are the key considerations on an infrared detector/module for your application?
---The detector resolution
---The pixel size
---The NETD
---The image quality
---The lens options
---The power consumption
---The size and weight
---The mechanical & electrical interface
---The budget
Audited Supplier 
){kind=link}